PRODUCT CODE: 60/SC3010
PRODUCT BRAND: EVE Audio
The SC3010 are 3-way, active main monitors built for the most demanding of applications in large recording and mastering studios, film/television post-production facilities, cinema applications and in-wall installations.
EVE Audio's SC3010 features a 10" woofer, 5" mid-range driver, EVE's proprietary AMT RS6 tweeter and a powerful amplifier array with a total output of 1300W. The SC3010 has one custom designed amplifier for each driver and was developed to deliver a perfect balance of high sound pressure levels, low distortion and optimised directivity. The AMT RS6 redefines the perception of how a tweeter should perform and was engineered to deliver unparalleled precise reproduction of high frequencies, even at high output levels with absolute minimal distortion.
Great care has been taken in the smallest details of this 3-way monitor, including the design of the front face of the speaker made from an ultra-stiff front plate made out of a combination of rigid plywood and a special inner construction to reduce unwanted resonances. The result is smooth directivity, very low distortion and a well defined middle and upper frequency range combined with a powerful and tight low end.
EVE Audio have designed and built the SC3010, and it's 12" driver counterpart - the SC3012, as both mounted main studio monitors and as in-wall installations. For in-wall applications an acoustic filter modification can be engaged by adjusting the filter controls to "inwall". To further improved the quality and focus of the speaker's response a set of high-density quality foam is provided so that the backfiring bass ports can be physically closed.
The stylish silver module in the middle of the speaker not only houses the midrange woofer and the AMT RS6 tweeter, but it can also be rotated 90-degrees, allowing the speakers to be positioned either horizontally or vertically, helping to preserve control room sight lines and further optimise acoustic performance.
- 10" Woofer
- 5" Mid-Range Driver
- AMT RS6 Tweeter
- Tri-Amped Design
- DSP Based Filters and Volume Control
- 24-Bit/192 kHz Burr-Brown A/D Converter
- Special, Round Edged Bass Port Design
- Balanced XLR and Unbalanced RCA Input Connectors
- Limiter For Speaker Protection
The SC3010 is the smallest of the biggest in EVE Audio's range of main monitors and is able to reproduce the entire audible frequency range with an ultra-low level of distortion. As with every EVE Audio speaker, both balanced XLR inputs and unbalanced RCA inputs for greater convenience are available on the rear panel.
The 10" SilverCone bass woofer, with a long excursion, provides an extraordinarily clean low frequency reproduction down to 30 Hz (-3 dB) and the hexagonal glass fibre layered diaphragm will easily reproduce all audio content, even at higher than usual SPL's.
The SC3010 also features EVE's newly developed 5" midrange unit with a glass fibre layered Rohacel™ sandwich diaphragm delivering a clear and detailed midrange frequency reproduction.
Exclusive to SC3010 and it's larger sibling the - SC3012, is the newly developed Air Motion Transformer AMT RS6. This new AMT is 2.5 times bigger than the original RS1, RS2 and RS3 Air Motion Transformer units, and it is a crucial part of the system, helping to couple the middle and high frequencies with fantastic precision. EVE's team was able to engineer the RS6 to set its crossover frequency at 1800 Hz, a very important frequency for human hearing and subsequently, music production.
Each driver is powered by it's own separate PWM amplifier that is able to deliver a short-term output power of 250 W per tweeter and midrange channel and 800 W for the low-end driver. With a maximum output level of 114 dB (SPL @ 1 m), you will definitely be able to judge your mixes precisely, whatever their final intended output level is.
The large rear rectangular port has no hard edges, a design EVE Audio carefully deliberated on before choosing for all of their 2-way, 3-way and 4-way monitors. The result is high sound pressures with tight and punchy bass frequencies that don't cause port distortion and is one of the reasons EVE monitors have such a amazing efficiency on the lower frequencies and will deliver an even, rounded bass response even with the volume cranked.
The front panel mounted push knob gives access to the accurate DSP-based volume control and filter settings via high quality A/D converter (24bit/192 kHz) from Burr-Brown that delivers a pristine signal to the DSP section. Since the PWM amplifiers are directly connected to the DSP, no additional conversion is necessary, providing accurate volume control and several different filter settings (high-shelf, desk, low-shelf) to help tailor your monitors to the way you work.
Combining powerful bass production, an incredibly transparent and present mid-range and crystal clear high frequency reproduction, the SC3010 is a 3-way system is the perfect main monitor whether you're producing a new hip-hop hit or mastering the contemporary works: the SC3010 will take your mix to the next level.
Dimensions (WxHxD) (mm) 380 x 580 x 440
Weight (kg) 37
Free-field frequency range (-3dB) 29Hz - 21kHz
Tweeter AMT RS6
Cross-over frequency 240Hz/1800Hz
Maximum SPL @ 1m 114dB
Number of amplifiers 3
Output power (woofers) 800W
Output power (mid-driver) 250W
Output power (tweeter) 250W
Protection limiter Onboard
Volume -inf. - +6dB
High-shelf filter (-5dB - +3dB) > 3kHz
Desk filter boost (0dB - +3dB) 80Hz
Desk filter cut (-5dB - 0dB) 160Hz
Low-shelf filter (-5dB - +3dB) < 300Hz
LED brightness setting
Level-lock dip switch
Filter-lock dip switch
Input level dip switch +7dBu/+22dBu
XLR in (impedance) (10k)
RCA in (impedance) (10k)
Standby < 1W
Full output 1000VA
SHIPPING WEIGHT: 41.00kg